Effective connection between high-pressure hoses and other equipment or pipelines requires following the following steps:

1. Choose appropriate connectors and sockets to ensure size matching. Usually, when selecting, it is necessary to consider the diameter, pressure rating, and other related factors of the rubber pipe to ensure correct use and maintenance convenience;
2. Clean and treat all surfaces to be inserted to avoid corrosion damage, such as applying lubricant to contact surfaces;
3. Insert the selected joint into the corresponding high-pressure rubber section and secure it with the internal iron wire. Check if the exposed pins of the connector are intact and free from impurities and blockages;
4. After installation, it is necessary to carefully check the device name, specifications and models, as well as whether the relevant materials and accessories are complete, and inspect the operation process for any problems;
5. To prevent sealing failure, filling the interface with filler or wrapping several layers of soap paste tape around leakage prone points can ensure safe and effective use and prolong service life. Note: it is strictly prohibited to add fasteners such as washers or springs to prevent leakage.
The above measures can effectively ensure the normal operation and improved service life of high-pressure hoses and other equipment. It should be noted that in practical applications, methods need to be adjusted according to specific situations to improve work efficiency and quality level!